Wall washer downlights
UKOO Lighting

Wall washer downlights

Wall washer downlights, the body is die-casting aluminum, power watt from 16W to 30W.
There are no comments to display.

Media information

LED Downlights
Added by
UKOO Lighting
Date added
View count
Comment count
0.00 star(s) 0 ratings

Share this media

LED downlights are lighting fixtures that are designed to be recessed into ceilings or other structure, directing light downwards. These are light fixtures that are installed into a surface so that they are flush or nearly flush with it. They are often used in architectural lighting design to provide illumination without being obtrusive. The design or appearance of the recessed luminaires is intentionally kept subtle, modest, or discreet. In other words, they are not designed to stand out or draw attention to themselves visually. The primary focus or priority is on the way the light emitted by these fixtures enhances the space. The design of the luminaires themselves takes a back seat to the desired lighting outcome. It's more about how the light enhances the ambiance, highlights architectural features, or illuminates tasks, rather than making a statement with the fixture's appearance. Recessed lighting is a practical and aesthetically pleasing choice in environments where space is limited or where a minimalist and clean design aesthetic is desired, such as rooms with low ceilings or areas where maintaining an unobstructed ceiling line is important. In modern interior design, there is often an emphasis on clean lines, simplicity, and minimalism. Recessed lighting fits well with this aesthetic because of its discreet appearance and ability to blend seamlessly into the architecture. It avoids the visual clutter that some other types of lighting fixtures may introduce.

LED downlights are versatile fixtures that fulfill various lighting needs within a space, including providing ambient, accent, and task lighting through their downward-directed illumination. The directional nature of LED downlights, which emit light primarily in a downward direction, contributes to their effectiveness in fulfilling various lighting needs. This downward illumination is controlled and focused, allowing for efficient lighting of specific areas without causing glare or wasted light. LED downlights can be used to provide overall illumination in a room, creating a comfortable and inviting atmosphere. By evenly spreading light across the space, they help reduce shadows and create a pleasant environment for various activities, such as socializing or relaxation. LED downlights are also effective for highlighting specific features or objects within a room, such as artwork, architectural details, or decorative elements. By focusing light on these focal points, downlights can add visual interest and drama to the space, enhancing its aesthetic appeal. In addition to ambient and accent lighting, LED downlights are often used to provide task lighting for specific activities that require focused illumination, such as reading, cooking, or working at a desk. By directing light precisely where it's needed, downlights can improve visibility and productivity in task-oriented areas.

Whether it's a residential living room, a commercial office space, or a retail store, LED downlights can adapt to different settings due to their flexibility in design and functionality. In a residential setting like a living room, LED downlights can serve multiple purposes. They can provide ambient lighting to create a cozy atmosphere for relaxation and socializing. Additionally, they can be used as accent lighting to highlight artwork or architectural features, adding visual interest to the space. Moreover, they can offer task lighting in areas where activities such as reading or watching television take place. LED downlights are well-suited for illuminating commercial office spaces. They can provide bright and even lighting throughout the area, promoting productivity and comfort for employees. Downlights can be strategically placed to minimize glare on computer screens while ensuring sufficient illumination for tasks. Additionally, they can contribute to the overall aesthetics of the office environment, enhancing its professional appeal. In a retail setting, LED downlights play a crucial role in showcasing merchandise and creating an inviting atmosphere for customers. They can be used to highlight product displays, draw attention to promotional areas, and accentuate the store's layout and design. By providing well-directed illumination, downlights help enhance the visibility and appeal of merchandise, ultimately influencing customer engagement and purchasing decisions.

LED downlights can have various beam types, which determine how the light is distributed and spread out. Narrow beam downlights emit a concentrated beam of light, typically with a beam angle of around 15 to 30 degrees. They are suitable for accent lighting or highlighting specific objects or areas. Wide beam downlights with a wide beam angle, usually 60 degrees or more, provide broad coverage and are ideal for general illumination of larger areas. They spread light over a wider area, making them suitable for lighting up rooms evenly. Similar to wide beam downlights, flood beam downlights have an even wider beam angle, often exceeding 90 degrees. They are designed to flood an area with light, making them suitable for task lighting or for creating a sense of spaciousness in a room. Spot beam downlights emit a very concentrated beam of light with a narrow angle, typically less than 15 degrees. They are perfect for highlighting specific objects or architectural features with precision. Some LED downlights feature adjustable beam angles, allowing users to customize the spread of light according to their needs. These downlights offer flexibility in lighting design and can adapt to different spaces or lighting requirements. These fixtures typically emit a beam of light that spreads out evenly in all directions, creating a circular or symmetric pattern. Wallwasher downlights have an asymmetrical light distribution, meaning the light is focused more towards one direction rather than spreading out evenly. The primary purpose of wallwasher downlights is to illuminate vertical surfaces, such as walls or architectural features. The light from these fixtures is directed onto the vertical surface, allowing for even and consistent illumination across the wall, which can enhance the aesthetics of the space and highlight artwork or decorative elements.

A recessed LED downlight can be either a lamp-based luminaire or an integrated LED luminaire. Lamp-based downlights use a light source where the optical performance characteristics are built into the light source itself. This light source can be various types of bulbs such as reflector bulbs (GU10, MR16, PAR, R, BR, or ER) or general service bulbs. Lamp-based LED downlights are often seen as retrofit options or entry-level products due to their plug-and-play convenience. However, they are less commonly used in architectural or accent lighting applications. Incorporating an LED bulb into a luminaire is considered over-designing because it compromises optical efficiency and makes precision beam control for specific applications challenging. Additionally, many LED bulbs on the market are under-designed to reduce costs. They may use inefficient heat sinks, bare-bones driver circuits, and low-performing LEDs. As a result, LED bulbs are often criticized for their poor light quality, lumen maintenance, and color stability, earning them the label of "crappy products" by industry insiders. LED lighting systems require a holistic approach due to the interdependent nature of their thermal, electrical, and optical characteristics. By considering these factors together, designers can unlock the full potential of LED lighting technology. Integrated LED downlights are recessed systems specifically designed and engineered to optimize the performance of LED modules. These systems ensure efficient regulation and precise distribution of the light emitted by the LED module. Integrated LED downlights often incorporate custom-designed secondary optics. These optics enable an array of discrete LEDs to produce uniform ambient illumination or enable a single-point LED to generate a concentrated spot beam for accent lighting. This customization allows for tailored lighting solutions to meet specific needs, whether it's general ambient lighting or focused accent lighting with high intensity. Integrated LED downlights leverage the luminaire housing for effective heat sinking. By efficiently dissipating heat, the junction temperature of the LED is kept under control, thereby maximizing its performance potential. This approach ensures that the LEDs operate within their optimal temperature range, which is crucial for maintaining longevity and performance consistency. In systems where drivers are co-located, miniaturized LEDs or compact LED arrays are used. This design strategy creates space within the luminaire housing for an electrical compartment. The electrical compartment accommodates the full-featured driver and control circuitry, ensuring efficient operation while isolating thermal stresses from the LED module.

An integrated LED downlight typically includes a housing, an LED light module, an LED driver, and a trim. The housing is the main structure of the LED downlight. It holds all the components together and provides structural support. The housing is typically installed within the ceiling or another surface, such as a wall, depending on the specific application. Its primary function is to securely hold the LED light module, LED driver, and trim in place. The LED light module is the component that emits light. It contains one or more LEDs arranged in a specific configuration to produce the desired lighting effect. The choice of LED package greatly influences the performance and reliability of LED downlights. Ceramic-based high power LED packages offer high optical flux densities for powerful spotlighting, mid-power SMD LEDs are suitable for ambient lighting in downlights, and COB LEDs provide homogeneous light emission and are preferred for accent lighting due to their thermal efficiency and standardized form-factors. LEDs undergo a process called "binning" to ensure consistency in key characteristics such as chromaticity (color temperature), lumen output (flux), and sometimes forward voltage (the voltage required to activate the LED). Binning involves grouping LEDs with similar performance characteristics together, keeping their variations within specified acceptance criteria. The LED driver is responsible for regulating the electrical current supplied to the LED light module. It converts incoming electrical power (AC or DC) to the appropriate voltage and current required by the LEDs. In some cases, the LED driver may be mounted externally to the housing to allow for a lower profile design, particularly in tight spaces like plenum ceilings. The trim is the visible part of the LED downlight that sits flush with the ceiling or surface. It serves both aesthetic and functional purposes, providing a finished look to the fixture and helping to direct or control the distribution of light. Trims come in various styles and finishes to complement different architectural designs and interior décor.

A downlight, sometimes referred to as a recessed light, canister light, or can light, earns these names due to its typical housing design. The housing of a downlight is often cylindrical or can-shaped, resembling a canister or can. Some LED downlights are fire-rated, meaning they are designed to prevent the spread of fire to other areas of the building for a specified period of time. This is an important safety feature in building codes. LED downlights may have an IC-rated housing, which allows them to come into direct contact with loose-fill blown or rolled insulation. This is crucial for installations where insulation is present in the ceiling cavity. In the U.S., there may be further regulations and requirements for recessed luminaires. These can include restrictions on heat retention or airflow (Reduced Airflow & Ultra-airtight) to ensure safety and energy efficiency. Canless recessed lighting has gained popularity in the commercial lighting sector. This trend is driven by the demand for designs that are easy for contractors to install and maintain. Unlike traditional recessed lighting fixtures, canless LED downlights do away with the need for separate housings and frames. This simplifies the installation process and reduces the overall bulk of the fixture. Canless downlights embrace a holistic approach to LED lighting systems. This means that all essential components, including the light engine, optics, trim, and sometimes the LED driver, are integrated into a single unit. Canless downlights are designed to be installed directly into the ceiling using spring-loaded retention tabs. This eliminates the need for additional support structures and simplifies the installation process. The housing of a canless LED downlight also serves as the heat sink for the attached LED module. Heat dissipation is crucial for maintaining the longevity and performance of LED lights, and integrating the heat sink into the housing maximizes efficiency. By integrating the LED housing and heat sink, canless downlights maximize the active surface area of the thermal path. This allows for efficient heat dissipation and reduces the length of the thermal path to minimize heat buildup.

The various types of trims for LED downlights offer different functionalities and aesthetic options to suit a wide range of lighting applications and design preferences. Reflector trims feature a smooth, reflective surface inside the trim. They are commonly used in applications where maximizing light output and coverage is important, such as general ambient lighting. Baffle trims have a ribbed or grooved surface inside the trim. These grooves help to reduce glare by diffusing the light and minimizing the visibility of the light source. Baffle trims are often preferred for spaces where visual comfort is a priority, such as residential settings or areas where people spend extended periods. Lensed trims feature a transparent or frosted lens covering the opening of the trim. The lens helps to soften and diffuse the light emitted by the downlight, resulting in a more uniform and gentle illumination. Lensed trims are suitable for applications where a softer, more diffused light effect is desired, such as in hospitality or healthcare settings. Pinhole trims have a small aperture or pinhole opening through which light is emitted. These trims create a concentrated beam of light, often used for accent lighting or highlighting specific objects or architectural features. Pinhole trims are ideal for creating dramatic lighting effects and adding visual interest to a space. Wall wash trims are designed to evenly distribute light across a vertical surface, such as a wall or artwork. They feature a wider aperture and specialized optics that help to spread the light in a uniform pattern, minimizing shadows and hotspots. Wall wash trims are commonly used in retail, gallery, or residential settings to highlight and showcase walls or decorative elements. A trimless LED downlight is a type of recessed light fixture that lacks an exposed trim flange, giving it a sleek and minimalist appearance. While it's technically not entirely "trimless" as the name suggests, as there is still a housing, it's often referred to as such in the industry. The absence of a visible trim flange enables trimless LED downlights to seamlessly integrate with the surrounding architecture. By eliminating the visual interruption of a trim flange, these fixtures become an integral part of the interior design composition and architectural style.

Accurate color reproduction in recessed lighting is essential for enhancing the visual appeal of spaces, supporting task performance, creating desired moods or atmospheres, and ensuring visual comfort. The way colors appear under a particular light source can significantly impact how people perceive objects and scenes. Accurate color reproduction ensures that the colors of objects appear true to life, allowing people to appreciate them as they would under natural lighting conditions. In environments where aesthetics matter, such as homes, art galleries, or retail stores, accurate color reproduction is essential for showcasing objects or products in their true colors. It enhances the visual appeal of the space and contributes to a more pleasing environment. In settings where tasks are performed, such as offices, kitchens, or workshops, accurate color reproduction is vital for ensuring optimal task performance. For example, in a kitchen, it's essential to accurately distinguish between different food items based on their colors. Lighting that accurately reproduces colors can contribute to overall visual comfort. Inaccurate color rendering can lead to visual discomfort or fatigue, as the eyes may struggle to interpret colors correctly. Phosphor-converted LEDs with blue pump utilize InGaN emitters to provide blue light, which then excites phosphors to emit white light. LEDs that emit high-intensity radiant power across the entire visible spectrum must convert a large portion of shortwave length (blue) light to longer wavelength emissions to produce white light. However, this process incurs energy losses known as Stokes energy loss. The more shortwave length light is converted, the lower the luminous efficiency of the LED becomes. Alternatively, white light can be produced using violet pump LEDs, employing a full phosphor approach. While these LEDs have lower efficacy compared to blue pump LEDs due to full wavelength conversion, they offer a unique advantage. Full wavelength conversion from violet light results in a spectral power distribution (SPD) that spans the entire visible spectrum, from violet through deep red. This leads to a light source with color rendering performance comparable to sunlight, with a greater amount of radiation at each wavelength.

Light is described as radiant energy that not only allows us to see but also influences the ambiance and subjective perceptions of brightness in a space. Correlated color temperature (CCT) is introduced as a metric for describing the color appearance of light sources. It's a measurable attribute that helps lighting designers control the warmth or coolness of the light. Warm light falls within the range of 2700 K to 3500 K, while cool white light has a CCT above 4100 K. Neutral white light is in between, ranging from 3500 K to 4100 K. Several variables influence the choice of CCT for lighting, including emotional moods, visual tasks, room color palette, circadian rhythms, and architectural aesthetics. Tunable white LED downlights are lighting fixtures that incorporate LEDs with varying CCTs within a single assembly. This design enables these lights to offer a continuously adjustable range of color temperatures, such as from 2700 Kelvin (warm white) to 6500 Kelvin (cool white), for what's known as human-centric lighting. Human-centric lighting aims to emulate the natural variations in daylight to better support human health, well-being, and productivity. By tracking the natural rhythm of daylight, tunable white lighting systems adjust their color temperature throughout the day. For example, they might emit warmer, more relaxing light in the morning and evening, resembling sunrise and sunset, and cooler, more energizing light during the day, resembling midday sunlight. "Dim-to-Warm" refers to a feature in lighting systems, particularly LED downlights, that allows for a change in color temperature as the light is dimmed. This feature replicates the warm glow effect seen in traditional incandescent lamps, which become warmer in color as their intensity decreases. This warm shift in color temperature mimics the transition from the reddish-yellow hue of a candle flame to the cozy, warm white light of incandescent bulbs. By offering this capability, Dim-to-Warm lighting systems provide users with the flexibility to adjust the mood and ambiance of a space according to their preferences or the requirements of an event or theme. Dim-to-Warm LED downlights achieve this effect by combining LEDs of two different colors within the same fixture for color temperature tuning. Additionally, they utilize a current sensing system to synchronize the adjustment of both color temperature and brightness levels. This ensures a seamless transition between different lighting intensities and color temperatures.

The LED driver serves a crucial role in regulating the current supplied to LEDs or strings of LEDs. It converts commercial AC power into a predetermined magnitude of DC power, typically through a switching mode power supply (SMPS). Designing or selecting an LED driver involves several considerations to ensure optimal performance and reliability. A constant current LED driver compensates for changes in supply voltage, variations in LED forward voltage over temperature, and device tolerance. This ensures stable LED performance regardless of fluctuations in operating conditions. Efficiency is a key consideration in LED driver design. Switching mode power supplies waste less electrical power compared to linear regulators, making them more efficient. However, linear regulators simplify circuitry at the expense of lower efficiency and increased thermal stress on LEDs. Ripple, residual periodic variation in the DC output, can cause flicker and other visual issues. It's crucial to minimize ripple to within a ±10% tolerance to maintain smooth and stable LED operation. Switching mode power supplies can generate high-frequency noise and electromagnetic interference (EMI), which must be filtered to meet regulatory standards. LED drivers with a power rating greater than 25W must also incorporate power factor correction (PFC) to ensure a power factor greater than 0.9 and reduce total harmonic distortion (THD). LED drivers with value-added features offer enhanced flexibility and performance in LED downlighting applications.

Beyond basic functionality, LED drivers can be equipped with value-added features to enhance the performance and versatility of LED downlights. LED drivers with dimming capability allow users to adjust the intensity levels of LED downlights according to their preferences or specific lighting requirements. This feature enhances flexibility in lighting control, enabling users to create different atmospheres or accommodate varying tasks. LED drivers equipped with constant light output (CLO) functionality ensure that the light output of LED downlights remains consistent over time, compensating for the natural depreciation of luminous flux as LEDs age. Some LED drivers incorporate energy-saving features, such as power factor correction (PFC) and dimming optimization algorithms, to improve the overall energy efficiency of LED downlights. These features help reduce energy consumption and operating costs while ensuring optimal performance and reliability. Advanced LED drivers may be compatible with various control systems, such as DALI (Digital Addressable Lighting Interface) or DMX (Digital Multiplex), enabling centralized or automated control of multiple downlights within a lighting system. This enhances convenience and efficiency in managing complex lighting installations, such as those in commercial or architectural settings. Smart LED downlights can be controlled remotely from anywhere with an internet connection using dedicated mobile apps or smart home platforms. Smart LED downlights can integrate with other smart devices and sensors in a home automation ecosystem. Many smart LED downlights are compatible with voice-controlled virtual assistants such as Amazon Alexa, Google Assistant, or Apple HomeKit. Users can simply issue voice commands to adjust lighting settings, set schedules, or create lighting scenes.

Top Lighting Manufacturers Shaping the Industry Open Lighting Product Directory