Wall-Mounted Healthcare Bedhead Light for Patient Rooms with Ergonomic and Hygienic Design
Thorn Lighting

Wall-Mounted Healthcare Bedhead Light for Patient Rooms with Ergonomic and Hygienic Design

The Cavell bedhead luminaire is a purpose-built lighting solution designed for healthcare environments, including hospitals, care homes, and hospices. Intended for installation above patient beds, it provides a combination of low-glare, soft lighting for the bedded area, the patient, and the surrounding bedroom or ward. Its dual-function optical design ensures that the direct light is minimized, promoting rest and recovery for patients while also providing sufficient illumination for healthcare professionals during examinations and observational checks. The uplight component is carefully angled to enhance ambient lighting, allowing patients, nurses, doctors, and other care staff to move safely around the room. Cavell’s twin drivers allow independent control of the up and downlight, which can be operated from both the patient’s bedside switch and the nursing station, ensuring flexibility and convenience for both patients and caregivers.

Healthcare lighting must balance functional requirements with patient comfort. Cavell addresses this by providing tailored illumination for the bed space and surrounding environment. For reading and personal tasks at the bedhead or pillow area, it delivers a minimum of 300 lux over a horizontal area of 1 m², accommodating various positions the patient may assume. During rest periods, the indirect lighting can be dimmed or turned off while the low-level downlight provides a gentle reading mode, allowing patients to use personal devices or read without disturbing others. For continuous observation, the luminaire provides 15–20 lux at the bedhead position, ensuring that patient monitoring can be conducted effectively without compromising comfort.

The luminaire delivers uniform, low-glare illumination across different bed layouts. Its optical design ensures that patients in opposite beds are not disturbed, while the uplight reflects off the ceiling to enhance the ambient environment of the room. Durability is key in healthcare settings, and the powder-coated steel body protects the luminaire against scratches and wear that can occur with daily use, maintaining a clean and professional appearance. Cavell is also engineered for hygiene, featuring seamless steel housing and two opal diffuser panels with no exposed screws, gaps, or crevices. This facilitates cleaning, prevents dirt and germs from accumulating, and supports stringent infection control procedures. A foam gasket on the reverse enables a flush fit to the wall, preventing dust and dirt from being trapped behind the luminaire.

Installation has been carefully considered to support efficiency and safety. Cavell features a lightweight backplate that is secured to the wall first, with the main body attaching via dog-clips to prevent accidental drops during assembly or maintenance. A 5-pin plug-and-play terminal allows easy wiring for both up and downlights, while fixing screws are located at the bottom and covered with plastic caps to maintain a clean, wipeable surface. The recommended mounting height is 1800 mm for ceilings between 2.4 m and 2.7 m, and the installation process involves securing the backplate, connecting the light engine with quick-fix connectors, and then locking it into place with the safety clip and screws.

Cavell combines high performance with patient-centric design. It delivers a total output of 6600 lumens, with a 30/70% split between direct and indirect light, meeting the LG2: Lighting for Healthcare premises (2019) standard for ward lighting. The luminaire features smooth radiused surfaces to reduce bacteria traps, an opal acrylic diffuser with optical film for controlled light distribution and reduced glare, and a curved internal reflector that enhances low-glare direct illumination. Both direct and indirect light are independently dimmable and controllable via DALI or SwitchDIM using two Tridonic one4all drivers, offering versatile lighting scenarios tailored to patient and caregiver needs. Cavell provides excellent visual comfort with CRI 80, a MacAdam 3 tolerance, L80 lifetime of 50,000 hours at 25 °C, and an IP40 ingress protection rating, ensuring reliability and longevity in demanding healthcare environments.

https://www.thornlighting.com/en/products/indoor-lighting/wall-mounted-luminaires/Cavell
  • LED Bedhead Luminaire for Hospitals and Care Homes with Independent Direct and Indirect Light Control, Low Glare, and Smooth Opal Diffuser for Patient Comfort
  • Wall-Mounted Bedhead Light for Healthcare Environments with Dual Dimming, DALI and SwitchDIM Control, High CRI, and 30/70% Direct to Indirect Light Split
  • Patient Room LED Bedhead Luminaire with Twin Drivers for Independent Up and Downlight Control, IP40 Rating, and Smooth Radiused Surfaces for Easy Cleaning
  • High-Output Bedhead Lighting Solution for Hospitals with Low-Glare Direct Downlight, Ambient Uplight, and Powder-Coated Steel Housing for Hygienic Care Settings
  • Medical Bedhead Luminaire for Wards and Single Patient Rooms with Dual Dimming, Ergonomic Design, and Opal Acrylic Diffuser for Reduced Glare and Comfortable Illumination
  • Healthcare Bedhead LED Light with Independent Control Over Direct and Indirect Illumination, Smooth Surfaces for Infection Control, and Easy Wall-Mount Installation
  • Wall-Mounted Bedhead Luminaire for Hospitals and Care Homes with Plug-and-Play Twin Drivers, IP40 Rating, and High Efficiency for Patient and Staff Areas
  • LED Bedhead Luminaire for Multi-Bedded Wards with Low-Glare Direct Light Over Patient, Ambient Uplight for Safe Circulation, and Easy-to-Clean Powder-Coated Steel Body
  • Hospital Ward Bedhead Lighting with DALI or SwitchDIM Dimmable LED Control, Smooth Radiused Surfaces, and Twin Driver Operation for Up and Downlight Management
  • High-Performance Bedhead Luminaire for Healthcare Facilities with Independent Direct and Indirect Light, Opal Acrylic Diffuser, and Curved Internal Reflector for Low Glare Output
  • Wall-Mounted LED Bedhead Light for Patient Rooms with Adjustable Lighting Scenes, Ergonomic Design, and Compliant with LG2 Lighting for Healthcare Premises Standards
  • LED Bedhead Luminaire for Hospitals and Care Homes with Smooth Opal Diffuser, Dual Dimming Control, and 6600lm Output for Optimal Patient Bedside and Ambient Lighting
  • Hospital Ward Bedhead Luminaire with IP40 Protection, Easy-to-Install Plug-and-Play Twin Drivers, and Low Glare Lighting for Patients, Staff, and Visitors
  • Bedhead Luminaire for Healthcare Facilities with Direct Downlight for Patient Reading and Indirect Uplight for Safe Circulation, DALI and SwitchDIM Control, and Powder-Coated Steel Housing
  • Patient Bed LED Bedhead Luminaire with Dual Lighting Control, Smooth Radiused Surfaces, Easy Cleaning, High CRI, and 30/70% Direct/Indirect Light Split for Hospital Rooms
  • Wall-Mounted Bedhead Luminaire for Hospitals with Ergonomic Design, Independent Direct and Indirect Light, Twin Drivers, and Smooth Surfaces for Infection Control and Easy Maintenance
  • LED Bedhead Luminaire for Care Homes with High Output, Low Glare Illumination, Twin Driver Control, DALI Dimming, and Smooth Opal Acrylic Diffuser for Patient Comfort
  • Hospital Ward Bedhead Light with Direct/Indirect Lighting Split, Independent Dimming, IP40 Protection, Plug-and-Play Installation, and Smooth Radiused Surfaces for Healthcare Hygiene
  • LED Bedhead Luminaire for Healthcare Environments with Dual Dimming, Ergonomic Wall-Mount Design, High CRI, Low Glare, and 50,000-Hour L80 Lifetime for Reliable Patient Lighting
  • Patient Room Bedhead Luminaire with Independent Up and Downlight, DALI or SwitchDIM Control, Smooth Powder-Coated Steel Housing, and Opal Acrylic Diffuser for Low Glare Illumination
  • Hospital Bed LED Bedhead Luminaire with Twin Drivers, Direct and Indirect Lighting Control, Smooth Surfaces for Cleaning, and Compliant with LG2 Healthcare Lighting Standards
  • Wall-Mounted LED Bedhead Luminaire for Wards and Single Patient Rooms with 6600lm Output, Low Glare Direct Light, Ambient Uplight, and Easy Plug-and-Play Installation
  • Bedhead Luminaire for Hospitals with IP40 Rating, Dual Dimming Control, Smooth Radiused Surfaces for Hygiene, and Direct/Indirect Lighting Split for Optimal Patient Comfort
  • LED Bedhead Luminaire for Healthcare Facilities with Low Glare Direct Lighting Over Bed, Indirect Ambient Lighting for Safe Circulation, DALI or SwitchDIM Control, and High CRI 80
  • Hospital Ward Bedhead Light with Independent Twin Drivers, Ergonomic Wall-Mounted Design, Smooth Opal Acrylic Diffuser, and Low Glare Lighting for Multi-Bedded Rooms
  • Patient Room Bedhead Luminaire with Direct and Indirect Light Control, Smooth Radiused Surfaces for Infection Control, Plug-and-Play Twin Drivers, and DALI or SwitchDIM Compatibility
  • LED Bedhead Luminaire for Hospitals and Care Homes with High CRI 80, 30/70% Direct/Indirect Split, Smooth Opal Diffuser, and Powder-Coated Steel Housing for Easy Cleaning
  • Wall-Mounted Bedhead Light for Hospital Wards with Dual Dimming, Independent Up and Downlight, Low Glare Illumination, and Plug-and-Play Installation for Nursing Efficiency
  • Hospital Ward Bedhead Luminaire with Direct Downlight for Patient Tasks, Ambient Uplight for Safe Circulation, Twin Driver Control, and Smooth Opal Acrylic Diffuser for Glare Reduction
  • Patient Room LED Bedhead Luminaire with Ergonomic Wall-Mounted Design, Low Glare Direct Light, Dimmable Indirect Lighting, and Smooth Radiused Surfaces for Easy Cleaning
  • Bedhead Luminaire for Hospitals with Independent Control of Direct and Indirect LED Light, DALI or SwitchDIM Drivers, Low Glare Output, and IP40 Protection for Healthcare Hygiene
  • LED Bedhead Luminaire for Care Homes with Twin Drivers, Plug-and-Play Installation, Smooth Surfaces for Cleaning, and High CRI for Accurate Colour Rendering in Patient Rooms
  • Hospital Bedside LED Bedhead Light with Independent Direct and Indirect Lighting, Low Glare, Smooth Opal Diffuser, and Ergonomic Wall-Mount Installation for Nursing and Patient Comfort
  • Bedhead Luminaire for Healthcare Facilities with Direct Downlight, Indirect Uplight, Twin Driver Dimming, Smooth Radiused Surfaces, and 50,000-Hour Lifetime for Reliable Illumination
  • Wall-Mounted LED Bedhead Light for Hospitals with High Output 6600lm, Dual Dimming, Direct/Indirect Light Split, and Smooth Powder-Coated Steel Housing for Easy Cleaning
  • Patient Room Bedhead Luminaire with Ergonomic Design, Independent Up and Downlight Control, Low Glare Illumination, Smooth Surfaces, and IP40 Protection for Healthcare Applications
  • LED Bedhead Luminaire for Multi-Bedded Wards with Direct/Indirect Lighting, DALI or SwitchDIM Drivers, Smooth Radiused Surfaces, and Low Glare for Patient Comfort
  • Hospital Ward Bedhead Light with Twin Drivers, Direct Downlight for Task Lighting, Indirect Ambient Uplight, Smooth Opal Acrylic Diffuser, and Plug-and-Play Installation
  • Patient Bed LED Bedhead Luminaire with High CRI 80, Dual Control Over Direct and Indirect Lighting, Low Glare Output, Smooth Radiused Surfaces, and Ergonomic Wall-Mount Design
  • Wall-Mounted Bedhead Luminaire for Hospitals and Care Homes with Direct/Indirect Lighting Split, DALI and SwitchDIM Compatibility, Low Glare, Smooth Surfaces, and Easy Cleaning
 

Media information

Category
Medical Lighting
Added by
Thorn Lighting
Date added
View count
27
Comment count
1
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
Cavell.jpg
File size
250.6 KB
Dimensions
1200px x 750px

Share this media

Top Lighting Manufacturers Shaping the Industry Open Lighting Product Directory
Top