The ECOdrive 20W and 25W compact LED drivers by eldoLED are digital programmable constant current drivers that deliver smooth, flicker-safe dimming to 1%, fully compliant with international flicker standards. These drivers are compatible with a wide range of dimming and control protocols, including DALI-2 DT6, Pulse dimming, 0-10V, Phase dimming, and LEDcode, enabling seamless integration with modern lighting systems. Certain models also support wireless control through Casambi and Atrius IoT modules, providing flexible networked lighting management. ECOdrive drivers are available for both built-in and independent use, with models featuring a strain-relief for secure installation.
The compact design of the ECOdrive CA series housing is specifically optimized for trimless downlights in Europe, allowing installation through small cut-outs down to 45mm. The drivers can be used for a variety of applications, including downlights, pendants, and spotlights, and they support a wide range of dimming and programming options across multiple protocols. The 20W compact family includes the ECOdrive model with dimming to 1%, the SOLOdrive model with dimming to 0.1% and Dim to Warm capability, and the DUALdrive model for Tunable White lighting. DALI-2 DT6 controls can be connected to Casambi wireless control modules, while DALI and 0-10V products include LEDcode interfaces for programming. Phase dimming drivers utilize a 4-level dipswitch for output current adjustment.
ECOdrive LED drivers deliver natural, flicker-free dimming with smooth brightness transitions, configurable minimum dim levels, and adaptable dimming curves. The drivers use Hybrid HydraDrive dimming technology, which has been validated for use in TV studios and security camera environments. Programmable features allow precise fine-tuning of dimming levels, output current (with 1mA resolution), dimming curves, Dim to Warm adjustments, and Tunable White control using FluxTool with LightShape. Performance characteristics include constant current SELV output, compatibility with European mains input (220-240VAC), low inrush current, low total harmonic distortion (THD), high power factor, and suitability for operation up to 50°C ambient temperature. The drivers also support central battery (DC) emergency operation.
ECOdrive drivers include comprehensive thermal and electrical protection. The LED output current automatically decreases if the internal driver temperature exceeds the factory preset threshold, and resumes once the temperature falls below the threshold. In the event of a short-circuit or open circuit on the LED output, the driver cuts off current and attempts a restart every 400ms. If the output load exceeds the driver’s maximum power rating, the driver sequentially scales down the current until the load is within limits. Reverse polarity will prevent the driver from yielding current, which protects the driver while potentially impacting the LED load.
Thermal protection can also be enhanced using an external NTC thermistor placed on a PCB near the LEDs, connected via the LEDcode/NTC terminals. When the NTC exceeds the maximum allowable temperature, the output current to the LEDs is reduced by 75%. Users can specify the temperature limit via FluxTool software, with a default NTC temperature limit set to 70°C. Suitable thermistor options include Vishay leaded (P/N 238164063473) and screw (P/N NTCASCWE3473J) models, providing additional safety and thermal regulation for sensitive LED installations.
The ECOdrive 20W and 25W compact drivers are optimized for European downlighting applications and provide a highly versatile, programmable, and safe solution for modern residential, commercial, and hospitality lighting projects. Their combination of compact size, natural dimming, wide protocol support, programmable features, and robust protection mechanisms makes them a flexible and reliable choice for a variety of lighting installations.
https://www.eldoled.com/products/detail/1988013/eldoled/ecodrive-20w-indoor-compact/programmable-constant-current-led-drivers-with-dimming-to-1-phase-dimming-dali-2-0-10v-and-ledcode
