The EVO® 8" round LED wall wash light provides a uniform and wide-angled distribution across horizontal and vertical surfaces, creating smooth edges and an even layer of light without hot spots or rings. Its batwing distribution design includes a 45° cutoff and open wall wash functionality, with self-flanged trim options for seamless integration. The optical assembly utilizes Bounding Ray™ technology, which eliminates flash and provides superior glare control while maintaining a balanced light output. Unitized optics are mechanically attached to the lower reflector to ensure precise optical alignment and consistent performance. The fixture is fully serviceable and upgradeable, with lensed LED light engines accessible from below the ceiling for maintenance or adjustments. Wallwash functionality ensures uniformity from floor to ceiling, optimized for ceilings between 8’ and 12’ with a recommended spacing of three feet from walls and three-foot center-to-center placement.
Performance of the EVO® 8" wall wash light includes lumens ranging from 2,000 to 3,000, with 70% lumen maintenance at 60,000 hours. The luminaire achieves typical color rendering of 85 CRI, with optional 90+ CRI configurations. It is suitable for wet location applications with covered ceilings and is CSA certified to meet U.S. and Canadian standards. Driver capabilities include up to 10 different options, ranging from 0-10V to DMX control, and the fixture is compatible with nLight® wired or wireless lighting networks. Emergency battery backup is included to maintain light output during power interruptions. Continuous dimming is supported over a wide range of 100–10%, 100–1.0%, or 100–0.1% of rated lumens with smooth shut-off to 0%, and eldoLED drivers conform to IEEE P1789 standards for flicker-free operation. All drivers operate silently within 24 dB environments and maintain stable output despite voltage fluctuations.
The EVO® 8" wall wash luminaire housing is constructed of 16-gauge galvanized steel and includes preinstalled telescopic mounting bars with a maximum extension of 32 inches and minimum of 15 inches, along with four inches of vertical adjustment. Luminaires accommodate ceilings up to 1½" thick, with optional ceiling thickness adapters extending support to five inches. Tool-less post-installation adjustments allow for precise alignment, and the assembly process ensures internal components are adequately supported to withstand mechanical shock and vibration. Standard clearance requirements include ½" from non-combustible materials in non-IC applications, with three-inch clearance required for insulated ceilings unless otherwise marked.
Reflector finishes include semi-specular, matte diffuse, and specular options, while the fixture supports smooth and balanced illumination for a variety of ceiling types including metal, wood, drywall, and suspended grid ceilings. LEDs are tested to LM-80 standards and measured according to IESNA LM-79-08 in accredited laboratories. Lumen output remains within 30% of initial output over 60,000 hours, with color appearance consistent within a 2.5 MacAdam ellipse tolerance. The EVO® 8" round LED wall wash light is assembled in the USA and meets Buy America(n) government procurement requirements under FAR, DFARS, and DOT regulations, ensuring compliance for a wide range of commercial, educational, healthcare, and institutional applications.
https://gothamlighting.acuitybrands.com/products/detail/1657559/gotham-lighting/evor-8-round-wall-wash/general-illumination-led-wall-wash
