Hi-lume Premier 0.1% EcoSystem LED Drivers provide a precise and versatile solution for a wide range of spaces and applications. These drivers deliver smooth, continuous dimming down to 0.1% of full output current, with Soft-on, Fade-to-Black technology enabling seamless transitions between 100% and 0.1% for an incandescent-like experience. The drivers support constant-current reduction dimming for video-friendly performance and maintain flicker-free operation across the full dimming range. This combination ensures a high-quality visual experience whether in professional, commercial, or residential installations.
The drivers are fully compatible with a wide range of Lutron controls, including HomeWorks QS, Energi Savr Node units with EcoSystem controls, GRAFIK Eye QS with EcoSystem controls, PowPak dimming modules and wireless fixture controls, and Quantum systems. This compatibility allows integration into both new installations and existing EcoSystem lighting control networks. QwikFig-configurable models are available, and the drivers include built-in protection against input power miswires up to 277 V~, ensuring safe and reliable operation. Each driver is factory-tested to guarantee full performance, RoHS compliant, and equipped with non-volatile memory to restore all settings after a power failure. Rated for a lifetime of 50,000 hours at an 80 °C (176 °F) calibration point, these drivers are designed to meet the rigorous demands of professional lighting systems.
The digital EcoSystem control link simplifies wiring and enhances reliability compared with traditional 0–10 V systems. It ensures compatibility among Lutron controls, LED drivers, ballasts, and sensors, accommodates zone and control changes without rewiring, and connects seamlessly to Lutron Vive and Quantum Total Light Management Systems for monitoring lighting power consumption. Polarity-free and topology-free, the EcoSystem link also allows compliance with local and national electrical codes, and can be configured for either Class 1 or Class 2 connections.
Regulatory approvals and compliance further reinforce the drivers’ suitability for professional installations. They are UL Listed Class P, NOM certified for Mexico, and manufactured in facilities registered to ISO 9001:2015 quality standards with ESD reduction practices following ANSI/ESD S20.20. Drivers comply with FCC Part 15 Class A, Canadian EMI Class A standards (CAN ICES-005(A)/NMB-005(A)), and UL 8750 requirements for LED equipment. Outputs are Class 2, and PEQ0 models meet the performance criteria for ENERGY STAR Luminaires Version 2.0 at 120 V~ and 277 V~ input for designated output ranges. These models also comply with Title 24 requirements, as detailed in Reference Joint Appendix JA8, for start-up times and fade-in lighting specifications.
Performance specifications emphasize smooth and precise dimming behavior. Soft-on, Fade-to-Black ensures lighting fades naturally between 100% and 0.1% without flashing to full brightness at turn-on. Operating voltage ranges from 120 V~ to 277 V~ at 50/60 Hz, and the drivers include patented thermal foldback protection. Typical standby power consumption is below 0.5 W, and outputs are protected against open-circuit and short-circuit conditions. Non-volatile memory preserves all settings after a power failure, providing reliable performance across all lighting scenarios.
Environmental tolerances ensure safe and quiet operation. Drivers are rated Class A for sound, inaudible in ambient levels of 24 dBA, with relative humidity tolerances up to 90% non-condensing and a minimum operating ambient temperature of 0 °C (32 °F). They are intended for indoor use and are suitable for both dry and damp locations.
Driver wiring and mounting are straightforward and code-compliant. Fixtures must be properly grounded according to local and national electrical codes, and drivers should only be installed within an enclosure. The drivers include 6-inch (152 mm) leads of stranded 18 AWG (0.75 mm²), rated for 600 V~ and 105 °C (221 °F), stripped to 0.5 inches (12.7 mm), to simplify secure and reliable installation.
