The 8-inch wide surface mount linear high abuse LED wraparound light is designed for both ceiling and wall installation, measuring 8" by 48" to provide broad coverage in demanding environments. Its robust construction and ADA-compliant design make it suitable for public areas requiring accessibility and durability. This fixture is ideal for transportation platforms, underpasses, and tunnels where consistent performance and resilience against impact and environmental exposure are essential.
The electrical system offers multiple color temperature options—3500K, 4000K, and 5000K—with a minimum CRI of 82, providing natural and accurate color rendering. It operates on 120-277VAC or 347VAC at 50/60Hz, using a serviceable constant-current electronic driver with a high power factor (>0.95) and low total harmonic distortion (<20% THD). Standard 0-10V dimming supports a 1-100% range with dim-to-dark capabilities, and the maximum source current is 330µA. For enhanced functionality, an optional embedded microwave motion sensor (MS) can be included, with factory default settings that provide a 20-minute time-out and dim the light down to 30% when unoccupied.
The housing is constructed from one-piece, seam-welded 16-gauge type 304 stainless steel, ensuring strength and resistance to abuse. Finish options include brushed stainless steel (#4) or white TGIC polyester powder coat with a five-stage pre-treatment. The powder coat finish undergoes a 1,000-hour salt spray test and achieves 92% reflectance, ensuring both durability and visual performance. Installation requires six-point mounting for the 4-foot fixture to maintain the Peace of Mind Guarantee®, and an optional Field Drilled Installation Holes (FDIH) feature is available for housings without pre-drilled wiring and mounting points.
The lens is a cold-formed 0.156" P12 polycarbonate, providing impact resistance and protection for the LEDs while allowing consistent light distribution. Alternate lens options are available to meet specific project needs. Stainless steel Torx® head fasteners are standard, with optional stainless steel center-pin reject Allen Head (AH) or Phillips Head (PH) fasteners for additional tamper resistance.
This luminaire is UL and CUL listed for wet locations when installed on covered ceilings and UL and CUL listed for damp locations when wall-mounted. It is ADA-compliant and has been tested to an IK10 impact protection rating in accordance with IEC 60068-2-75:1997-08, confirming its ability to withstand heavy impact while maintaining safety and operational integrity. The combination of rugged construction, reliable electrical performance, and ADA compliance makes this 8-inch linear wraparound light an ideal solution for high-abuse environments where durability, safety, and accessibility are paramount.
https://kenall.com/Products/TSH8.htm
