18W Constant Power LED Emergency Driver with Universal Voltage Input for Class 2 Forward Voltage LED Arrays
IOTA

18W Constant Power LED Emergency Driver with Universal Voltage Input for Class 2 Forward Voltage LED Arrays

The IOTA ILB CP18 HE CW LP64 is a compact, high-efficiency LED emergency driver that allows a single LED fixture to perform seamlessly in both normal and emergency lighting conditions. During standard operation, the fixture functions through its normal LED driver. However, in the event of a power failure, the ILB CP18 HE CW LP64 automatically switches to its internal emergency power mode, supplying up to 18 watts of constant output to the connected LED array for a full 90 minutes. This ensures uninterrupted, code-compliant illumination during emergencies, making it an ideal solution for maintaining visibility and safety in critical egress areas.

This model integrates a charger and converter circuit within a reduced-profile, galvanized steel housing, complemented by a separate flexible LiFePO₄ (Lithium Iron Phosphate) battery pack. The two-part battery design enhances installation flexibility, allowing the battery to be mounted in various positions or compartments within a fixture. The LiFePO₄ battery is maintenance-free, lightweight, and engineered for long service life, with a recharge time of 24 hours after full discharge. The unit is activated via a connector and incorporates an IP67-rated single-piece test switch and charge indicator for easy verification and manual life safety testing.

Delivering 18 watts of constant power across a nominal voltage range of 20–58 VDC, the ILB CP18 HE CW LP64 ensures steady illumination throughout the entire emergency runtime without degradation in brightness. Its auto-sensing, Class 2 compliant circuitry automatically adjusts to a wide range of forward voltage LED configurations, supporting versatility across different luminaire designs. The driver’s performance is optimized for ambient temperatures between -20°C and 60°C, making it suitable for outdoor pathways, cold storage environments, and other challenging applications where consistent performance under temperature extremes is critical.

The ILB CP18 HE CW LP64 meets stringent regulatory standards, including UL 1310 certification and compliance with NEC, IBC, and NFPA 101 Life Safety Code emergency lighting requirements. It is approved for use in both switched and unswitched fixtures and rated for damp locations, as well as enclosed and gasketed luminaires with IP67 protection. Environmentally conscious construction ensures RoHS compliance, while a three-year warranty supports long-term reliability. Operating on a universal input voltage of 120–277 VAC at 50/60 Hz, this emergency LED driver combines safety, adaptability, and durability—making it a dependable component for maintaining continuous illumination in commercial, industrial, and architectural lighting systems.

https://www.iotaengineering.com/products/detail/1315946/iota/ilb-cp18-he-cw-lp64-emergency-led-driver/18-watt-low-profile-constant-power-emergency-led-driver-for-cold-weather-and-ip67-applications-with-lithium-battery-pack
  • Constant ower Emergency LED Driver for Commercial and Industrial LED Fixtures with Extended Runtime and Temperature Range
  • Compact UL 1310 Certified LED Emergency Driver with LiFePO₄ Battery and IP67 Test Switch for Damp Locations
  • Class 2 Compliant LED Emergency Driver with Auto-Sensing Voltage Output and Constant Wattage Performance Across 20–58 VDC Range
  • Lithium Iron Phosphate Battery Emergency Power Supply for LED Fixtures in Outdoor and Freezing Environments
  • UL Listed Emergency LED Power Supply with Constant 18-Watt Output and Flexible Two-Part Battery Design
  • IOTA Compact Emergency LED Driver with Constant Output and IP67 Rated Accessory Kit for Harsh Environments
  • Emergency Power Driver for LED Luminaires with 18-Watt Constant Output and Long-Life LiFePO₄ Battery Syste
  • Low-Profile LED Emergency Backup Driver with Auto-Adjusting Output Range for Class 2 Forward Voltage LED Arrays
  • IP67-Rated Emergency LED Control Unit with Integrated Charger and Converter Circuit for Reliable Egress Lighting
  • Constant Power LED Backup Module for Damp Location Fixtures and Gasketed Luminaires with Flexible Battery Mounting
  • Universal Input Emergency LED Power Pack for 120–277V Applications in Architectural and Industrial Lighting Systems
  • Long-Life Lithium Battery Backup System for LED Fixtures Meeting NEC and NFPA 101 Emergency Lighting Requirements
  • Cmpact Steel Housing LED Emergency Driver for 20–58VDC Arrays with Non-Diminishing Light Output Runtime
  • Emergency Backup Solution for LED Luminaires with Auto-Sensing Voltage Range and Constant Power Output Stability
  • Flexible Battery LED Emergency Module with Constant Power Control for Outdoor and Cold-Temperature Environments
  • Constant Output Emergency LED Unit for Commercial Lighting Applications with Extended Ambient Temperature Operation
  • Class 2 Certified Emergency Power System with 18W Output for Indoor and Outdoor Architectural LED Fixtures
  • IP67 Certified LED Backup Driver with Integrated Test Switch and Charge Indicator for Code-Compliant Installations
  • UL Certified Constant Power LED Emergency Unit with Long Runtime and Auto-Adjusting Voltage Output Capability
  • Compact Emergency LED Converter and Charger Module with Separate Battery for Flexible Fixture Integration
  • Constant Wattage LED Emergency Solution for Linear, Recessed, and Architectural Lighting with Reliable 90-Minute Backup
  • Durable LiFePO₄ Battery Emergency Driver for LED Arrays with Full Output Through Entire Discharge Cycle
  • Rugged LED Emergency Power Pack for Industrial Fixtures with Extended Temperature and Moisture Protection
  • Auto-Sensing LED Emergency Driver for Class 2 Luminaires with Consistent Brightness During Power Loss
  • IOTA UL Listed LED Emergency Backup Driver with Constant Power and Flexible Battery Component
  • Compact Constant Power Emergency LED Unit with Damp Location Rating and Life Safety Code Compliance
  • 18W Constant Output LED Emergency Power Source with Reliable Performance in Harsh Environmental Conditions
  • Long-Lasting Lithium Battery LED Emergency System for Commercial Fixtures with Quick Recharge and Manual Testing
  • Constant Power LED Emergency Backup Driver for Egress Lighting and Safety-Critical Illumination Applications
  • UL 1310 Certified Constant Output LED Power Pack for Damp, Enclosed, and Outdoor Luminaire Installations
  • Integrated Emergency Power Module for LED Fixtures with Auto-Adjusting Voltage and Compact Battery System
  • Durable Galvanized Steel Housed Emergency LED Driver for Long-Term Commercial and Industrial Lighting Reliability
  • Flexible Mounting Emergency LED Battery System with IP67 Test Switch for Tight Fixture Compartments
  • Class 2 Output Constant Power Emergency Driver with Universal Voltage Input and Code-Compliant Construction
  • Extended Temperature Range LED Backup Driver for Pathway, Outdoor, and Freezing Area Emergency Applications
  • 18W Constant Power LED Emergency Driver for Smooth Transition During AC Power Interruptions
  • Compact Emergency Lighting Driver for LED Fixtures with 90-Minute Runtime and Constant Power Stability
  • Maintenance-Free LiFePO₄ Battery Emergency Power Supply for LED Systems in Harsh Indoor and Outdoor Conditions
  • IOTA Emergency LED Driver with Auto-Sensing Voltage, Long Battery Life, and Compact Galvanized Housing
  • UL Listed Constant Power LED Emergency Backup Unit with RoHS Compliance and Extended Temperature Durability
  • Compact IP67 Emergency LED Power Module with Class 2 Compliance and Non-Degrading Output Performance
  • Constant Power Emergency LED Converter for 120–277V Installations with Long-Life Lithium Battery Support
  • Flexible Two-Part LiFePO₄ Battery Emergency LED Driver with Wide Voltage Compatibility for Modern Luminaires
  • UL Compliant Emergency LED Power Source for Switched and Unswitched Fixtures with Constant Wattage Control
  • Constant Output Emergency LED Backup Solution for Commercial Lighting Meeting NEC and NFPA Standards
  • High Reliability LED Emergency Power Driver with IP67 Protection and Auto-Adjusting Class 2 Output Range
  • Compact Constant Power LED Driver for Emergency Use in Harsh and Damp Environments with 3-Year Warranty
  • Rugged LED Emergency Backup Module for Industrial, Commercial, and Outdoor Luminaires with Flexible Battery Design
  • Universal Voltage Constant Power Emergency LED Unit for Reliable Egress Lighting Across Diverse Applications
  • Long-Life Emergency LED Driver for Class 2 Fixtures with Auto-Sensing Voltage and Non-Diminishing Light Output
 

Media information

Category
Emergency Lighting
Added by
IOTA
Date added
View count
27
Comment count
1
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
ilb-cp18-he-cw-lp64-emergency-led-driver.jpg
File size
304.7 KB
Dimensions
1200px x 750px

Share this media

Top Lighting Manufacturers Shaping the Industry Open Lighting Product Directory
Top