Need Advice Nicor LSL select + not powering on.

Currently reading:
Need Advice Nicor LSL select + not powering on.


New member
I recently purchased a Nicor LSL Select 8' LED strip, wired it up with the black , white and green and it wont turn on. The "connect wiring as shown" in the directions says "grey and pink wire is for 0-10v dimming systems. Cap off if not used" I didn't cap anything off and i'm wondering if this is the problem.

I simply pulled the black, white & green wires from inside the housing through the pre-punched terminal in the top/back of the housing and wired them up to the corresponding wires from my power supply.

Does anyone know if not capping off the grey & pink wires is my issue?
Top Lighting Manufacturers Shaping the Industry Open Lighting Product Directory