The turtle-safe wall pack downlight is a purpose-built, environmentally sensitive fixture designed to meet coastal wildlife requirements while supporting practical nighttime visibility in security, hospitality, airport, parking, and general commercial environments. Its static-color LED engine is available in a standard 590nm yellow/amber output or an optional 617nm red/orange circadian wavelength, both of which emit no light below 560nm to comply with turtle-friendly standards. The LEDs produce true, non-phosphor-converted color for accurate wavelength control and long-term stability. Operating at 20 watts with a rated L70 lifetime of 60,000 hours, the fixture delivers 506 lumens through a tightly managed 36° narrow optic that shapes the beam for precise distribution. Additional optical control is supported by a 45° cut-off that limits glare and reduces spill light, while an optional Beach Visor accessory can further block stray wide-angle output when required for sensitive beachfront or wildlife zones.
Its lighting control capabilities include standard 0–10V CCR dimming down to 1%, enabled by a constant-current, electronically stabilized driver that operates reliably from −22°F (−30°C) and across a 120–277V, 50/60 Hz input range. This load-insensitive power system ensures consistent performance for exterior and interior installations alike. The open-look, flat-trim assembly is sealed and gasketed, combining a flush clear tempered glass lens, a ½-inch square black eggcrate, and a silicone seal to protect internal components while maintaining optical efficiency. The bronze powder-coated cast-aluminum housing with chromate conversion resists environmental degradation, supports cool operation to extend component life, and offers a modular, fully serviceable design accessible through the aperture.
With a 9″ × 13″ rectangular aperture, an 11-1/4″ fixture depth, and suitability for new construction, the downlight is listed for UL Wet Locations and meets Build America, Buy America (BABAA) requirements. It can be installed on covered exterior ceilings, open exterior locations, or interior spaces where controlled, turtle-friendly lighting is needed. The unit mounts directly to a wall or a wall-mounted junction box and includes three conduit knockouts for straightforward integration. Together, these attributes create a robust, wavelength-specific lighting solution that supports ecological protection while meeting the functional needs of architectural, commercial, and hospitality applications.
https://www.kirlinlighting.com/tst-07180/
