Digital dimmers and switches provide intuitive manual control of lighting zones, available in multiple configurations including single or dual switch and single or dual dimmer options. These stylish single-gang devices are offered in several colors and are designed for ease of use by end users. They can also be paired with other digital wall stations to enable dimming and switching control from multiple locations within a space, supporting multiway operation such as 3-way or 4-way setups. All products are proudly manufactured in the USA, maintaining consistent design and quality across wired and wireless wall stations.
Communication across the digital suite is enabled through a topology-free, three-wire data line connection, using standard 18/3 cable and wire nuts. This eliminates common issues found in CAT-5 based systems. Each wall station is individually addressable and can be digitally zoned together with load controllers and sensors through one of three methods. Out-of-the-box single-zone configuration is the simplest option, while multi-zone setups can be paired via a push-button sequence or through a mobile application, which requires an advanced digital load controller. Once paired, each control zone can be customized with multiple operating modes, dimming settings, and photocell parameters for precise lighting management.
Applications for these wall stations include classrooms, conference rooms, open offices, hallways, small offices, copy rooms, private restrooms, and break rooms. A dual-zone remote wall switch can be paired with two digital load controllers and a sensor to achieve code-compliant vacancy operation, while a dual-zone remote dimmer allows raise/lower control of each zone. The devices pair independently with each zone, and additional switches or dimmers can be added to support control from multiple locations.
The devices support control of up to two zones in a single gang enclosure and feature swappable faces available in six color options to match existing décor. The decorator style fits standard wall plates, and the appearance is consistent with other wired and wireless wall stations in the system. Installation is simplified by the topology-free three-wire digital architecture, which connects via 18/3 cable and wire nuts and avoids common CAT-5 system issues.
Physically, the devices measure 2.74 inches high by 1.68 inches wide by 1.39 inches deep (6.96 x 4.27 x 3.53 cm) and weigh 2.5 ounces, mounting in a standard single-gang switch box. Electrical specifications include a 15 VDC operating voltage and an 8 mA current draw. The three-wire digital data line carries power, common, and data signals, supporting point-to-point runs up to 1000 feet and total bus lengths up to 4000 feet. Communications use a proprietary encrypted protocol, with zone configuration possible out-of-the-box, via push-button pairing, or through the mobile application.
Environmental ratings include standard operating temperatures of 32°F to 122°F (0°C to 50°C), with an extended option down to -40°F/C. Relative humidity tolerance ranges from 0-95% non-condensing for indoor use only. These switches are suitable for compliance with ASHRAE 90.1, IECC, and Title 24 energy codes, supporting both manual and multiway lighting control applications across commercial and institutional spaces.
https://www.sensorworx.com/digital-remote-switches-dimmers/
