The 4426 44 and 86 watt submersible LED fountain light delivers optimized performance and superior lumen maintenance for a variety of water feature applications, including fountains, reflecting pools, and waterfalls. Available in Monochromatic LED or RGB LED arrays, the 4426 submersible fountain light supports DMX-controlled dynamic color, enabling precision color mixing and remote lighting control. The fixture is IP68 rated for continuous submersion and includes a twist-and-lock niche mounting system for secure and efficient installation, while accommodating stainless steel niches with cast bronze mounting rings. Fixtures are available in Bronze, Saltwater Bronze, or Stainless Steel, providing material flexibility for different aesthetic and environmental requirements.
The 4426 submersible fountain light supports seven distributions, including narrow spot, very wide flood, horizontal spot, horizontal flood, medium flood, wide flood, and flood, allowing precise optical control for varying landscape and water feature designs. Color temperatures for Monochromatic options include 2700K, 3000K, 4100K, 5300K, and phosphor-converted amber, while RGB or RGBW arrays enable dynamic color sequences controlled via standard DMX512 hardware at up to 44 frames per second. The fixture allows in-line dimming to 40% for energy and scene control, and all channels utilize logarithmic power for finer color and intensity adjustments. The 4426 submersible fountain light is compatible with Easyl and Fresco DMX controllers, which must be ordered separately, and includes minimum 35-foot submersible rated power and DMX signal cords with epoxy-encapsulated cord entrances, ensuring reliable underwater operation.
The housing and fixture components are constructed from heavy wall cast bronze with either natural bronze or stainless steel finishes, providing durability and resistance to harsh environments. The stainless steel niche includes a cast bronze mounting ring that locks the fixture into position, with four ears for tying to forms or structural rods and pressure grounding lugs on interior and exterior surfaces. Conduit entrances are 3/4” NPT. LED arrays include 3X6LED (18 watts) and 4X6LED (24 watts) options, with white CCTs at 3000K, 4100K, and 5300K, as well as monochromatic amber, red, green, or blue. The convex linear spread lens is made from 8-5/8” (219mm) tempered glass, while a single-piece molded U-shaped silicone gasket provides water-tight sealing. Fixtures are factory leak tested at 10 PSI while fully submerged to ensure long-term reliability.
Electrical requirements include 12-volt AC operation via a remote magnetic step-down transformer, with dimming possible using standard reverse-phase magnetic dimmers. Fasteners are stainless steel, and floor-mounted applications require a cast bronze rock guard. The fixture is cCSAus listed as a submersible luminaire, tested according to UL 676 and UL 8750 standards. Government compliance includes the Buy America Act (BAA) and Build America Buy America (BABA), qualifying the product as a domestic end product under FAR, DFARS, and DOT Buy America regulations. The 4426 submersible fountain light provides a robust solution for dynamic underwater applications with high-quality optical performance, DMX512 lighting control, precise color mixing, and durable materials suitable for demanding wet environments.
https://hydrel.acuitybrands.com/products/detail/102214/hydrel/4426-led-ftn/led-rgb-fountain-and-water-feature-fixture-rgbw-as-custom
