Exterior Low Voltage Linear Static White LED Wall Grazer with Adjustable Mounts and Continuous Run Options
Hydrel

Exterior Low Voltage Linear Static White LED Wall Grazer with Adjustable Mounts and Continuous Run Options

The HYLINE HLF200 Series is an exterior low voltage linear static white LED wall grazer, specifically developed for the grazing and accenting of walls, ceilings, and other architectural planes in wet locations. This surface-mounted linear LED fixture operates on 24VAC and is compatible with commonly available low voltage magnetic dimming equipment, allowing precise lighting control over intensity and ambiance. A wide selection of remote transformers is available with 120V and 277V primary voltage, ensuring flexibility in installation. The HLF200 Series utilizes Nichia 757 white LEDs in four standard color temperatures—2700 K, 3000 K, 3500 K, 4000 K, and 5000 K—offering a CRI of 80 for consistent color rendering and high-quality visual output. The series delivers light distributions in medium flood, spot, and wide flood patterns, providing tailored grazing effects for both small and expansive surfaces.

Constructed with durable extruded aluminum, the HLF200 Series is available in sections ranging from 1 ft to 4 ft in six-inch increments. The fixture incorporates two unique mounting methods, allowing for flexible installation in any orientation. Both fixed and adjustable mounts include an integral wire cover to keep wiring organized and concealed, maintaining a clean, professional appearance regardless of fixture positioning. The adjustable mount provides over 300 degrees of rotation, while the low-profile fixed mount measures just 1/8" high, offering minimal visual impact. End-to-end mounting options allow for continuous runs with no visible shadow lines between units, enhancing the uniformity of light across walls and ceilings.

Hydrel offers three methods for planning continuous runs to suit project requirements. The Linear Same Length (LSL) configuration standardizes each segment based on the longest length available, the Linear Center Balanced (LCB) configuration places the longest center segments with additional lengths at the ends for balanced rows, and the Linear Longest Possible (LLP) configuration optimizes the longest lengths for minimal segment count and mounting locations, though balanced visual appearance should be considered. The HLF200 Series is strictly powered by 24VAC through magnetic transformers; connection to line voltage will permanently damage internal components and void the manufacturer’s warranty. Total run wattage should not exceed 80% of transformer capacity, and maximum distance from the transformer to the first fixture depends on wire gauge, total load, and starting voltage.

Optical control is provided through clear polycarbonate lenses and customizable beam spreads of 15, 30, 60, and 100 degrees, allowing precise grazing and accenting for a variety of wall and ceiling surfaces. Each linear segment features sixteen LEDs per foot, creating uniform light output across the run. The series can be dimmed using remote-mounted low voltage magnetic transformers, providing smooth and reliable control of brightness levels for both aesthetic and functional lighting applications.

Installation is straightforward: the installer fastens the mount clips, runs power feed lines, connects the fixture’s wire leads, and snaps the HLF200 Series into place. Both mounting options support almost any installation scenario, including walls, ceilings, or architectural features, and allow for flexible positioning and adjustment. The series is ETL listed for wet locations, complying with UL Standard 2108, making it suitable for exterior environments exposed to weather or moisture.

The HYLINE HLF200 Series qualifies under the Buy American Act (BAA), DOT Buy America regulations, and the Build America, Buy America Act (BABA), confirming it as a domestically produced product. The series is backed by a five-year limited warranty, which is the only warranty provided, with all other express or implied warranties disclaimed. This combination of low voltage operation, flexible mounting, dimming capability, customizable optical distributions, and high-quality white LEDs makes the HLF200 Series a reliable and versatile solution for architectural wall grazing and exterior accent lighting.

https://hydrel.acuitybrands.com/products/detail/1240257/hydrel/hyline200-led/exterior-linear-low-voltage-static-white-led-surface-mount
  • Exterior Low Voltage Linear Static White LED Wall Grazer with Adjustable Mounts and 0-10V Magnetic Dimming for Wet Locations
  • Surface Mount Linear LED Wall Grazer with 24VAC Power and Medium Flood, Spot, and Wide Flood Distributions
  • Linear LED Wall Grazer with Nichia 757 White LEDs and Four Color Temperatures with Magnetic Low Voltage Dimming Control
  • Exterior LED Wall Grazer with Extruded Aluminum Housing, Clear Polycarbonate Lens, and Over 300 Degrees of Rotational Mounting
  • Low Voltage Linear LED Wall Grazer with 1ft Through 4ft Section Lengths in Six Inch Increments for Continuous Runs
  • Linear Wall Grazer with Integral Wire Tray and Concealed Wiring for Clean Exterior Wall Installations
  • Linear Wall Grazer with Adjustable Mounts and Low Profile Fixed Mount Measuring 1/8 Inch for Exterior Architectural Use
  • Exterior LED Linear Grazer with End-to-End Mounting and No Visible Shadow Lines Between Units for Walls and Ceilings
  • Linear LED Wall Grazer with Magnetic Transformer and Common Low Voltage Dimmer Compatibility for Wet Locations
  • Linear Wall Grazer with Short, Medium, and Long Beam Spreads for Targeted Wall and Ceiling Grazing Applications
  • Exterior Wall Grazer with Clear Polycarbonate Lens and Adjustable Rotation for Medium Flood, Spot, and Wide Flood Distributions
  • Low Voltage Linear LED Wall Grazer with 16 LEDs per Foot and Four Standard White Color Temperatures for Wall Surfaces
  • Linear LED Wall Grazer with End-to-End Mounting Options and Flexible Segment Planning for Continuous Architectural Wall Coverage
  • Exterior Linear LED Wall Grazer with Die-Cast Aluminum Housing and Snap-In Installation for Quick and Efficient Mounting
  • Low Voltage Linear LED Wall Grazer with Magnetic Dimming and Remote 120V or 277V Transformer Compatibility
  • Linear LED Wall Grazer with Integral Wire Cover and Concealed Wiring for Neat and Organized Exterior Installations
  • Exterior Linear LED Wall Grazer with Adjustable Mount Rotation of Over 300 Degrees for Targeted Wall Grazing Angles
  • Low Voltage Linear LED Wall Grazer with Clear Polycarbonate Lens and Wet Location ETL Listing for Exterior Applications
  • Linear LED Wall Grazer with Medium Flood, Spot, and Wide Flood Beam Spreads for Walls, Ceilings, and Architectural Planes
  • Linear LED Wall Grazer with LSL Linear Same Length, LCB Linear Center Balanced, and LLP Longest Possible Runs for Continuous Coverage
  • Exterior Linear LED Wall Grazer with Magnetic Low Voltage Dimming and 24VAC Operation for Residential and Commercial Wall Applications
  • Linear LED Wall Grazer with Nichia 757 LEDs, Four White Color Temperatures, and 0-10V Dimming for Wet Location Use
  • Exterior Low Voltage Linear LED Wall Grazer with Durable Extruded Aluminum Housing and Snap-In Mounting for Quick Installation
  • Linear LED Wall Grazer with Adjustable Mounts and Integral Wire Tray for Concealed Wiring on Exterior Walls and Ceilings
  • Linear LED Wall Grazer with Over 300 Degrees of Rotation and End-to-End Mounting Without Shadows for Uniform Wall Coverage
  • Low Voltage Linear LED Wall Grazer with Magnetic Transformer and Commonly Available Dimmer Switches for Controlled Exterior Wall Grazing
  • Exterior Linear LED Wall Grazer with Clear Polycarbonate Lens and Adjustable Beam Spreads of 15, 30, 60, and 100 Degrees
  • Linear LED Wall Grazer with Section Lengths from 1ft Through 4ft in 6 Inch Increments for Continuous Architectural Runs
  • Linear LED Wall Grazer with ETL Listing for Wet Locations and Compliance with UL Standard 2108
  • Exterior Low Voltage Linear LED Wall Grazer with Magnetic Dimming and Remote 120V or 277V Transformers for Flexible Control
  • Linear LED Wall Grazer with 16 LEDs per Foot, Medium Flood Distribution, and Wet Location ETL Certification for Exterior Use
  • Exterior Linear LED Wall Grazer with Adjustable and Fixed Mount Options for Precise Alignment and Wall Grazing Angles
  • Low Voltage Linear LED Wall Grazer with Integral Wire Cover and Concealed Wiring for Clean, Professional Exterior Installations
  • Linear LED Wall Grazer with LSL, LCB, and LLP Continuous Run Options for Custom Wall Coverage
  • Exterior Linear LED Wall Grazer with 24VAC Magnetic Transformer and Low Voltage Dimming for Smooth Brightness Control
  • Linear LED Wall Grazer with Extruded Aluminum Housing and Snap-In Mounting for Medium Flood, Spot, and Wide Flood Applications
  • Linear LED Wall Grazer with Clear Polycarbonate Lens, Nichia LEDs, and 80 CRI for Consistent White Light
  • Exterior Low Voltage Linear LED Wall Grazer with Flexible Mounting, End-to-End Continuous Runs, and Concealed Wire Tray
  • Linear LED Wall Grazer with Adjustable Mounts, Over 300 Degrees Rotation, and Low Profile Fixed Mount for Architectural Walls
  • Low Voltage Linear LED Wall Grazer with Magnetic Dimmer Compatibility, Remote Transformers, and ETL Wet Location Listing
 

Media information

Category
Façade and Structure Lighting
Added by
Hydrel
Date added
View count
41
Comment count
1
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
hyline200-led.jpg
File size
231.8 KB
Dimensions
1200px x 750px

Share this media

Top Lighting Manufacturers Shaping the Industry Open Lighting Product Directory
Top